|
Using Screenprint Separator software you can print direct to the out of the box Epson 3000
without the need to purchase an expensive RIP station
AND MEDIA COSTS OF ONLY 85 CENTS PER SQ. FOOT!
Ecopro and OYO film is around $1.95 per sq. Ft. and only prints at 600 dpi.
One full size 8 color t-shirt design can be 20sq. Ft.- this would cost only $17.00 using POSJET film and almost $40.00 using thermal film.
If you produce only 4 designs a week this will save more than $80.00 over the thermal film costs.
At that rate you will save $13,000 per year on the cost of running an OYO or an ECOPRO unit.
Not bad for a printer that sells on the net for $875.00
see www.mysimon.com for the latest prices.
 
The secret to perfect registration on the ink jet printer is that the printed media stays cool.
Thermal image setters and laser printers heat the film unevenly causing loss of registration.
With no heat source to distort and shrink the polyester film base, each set of positives are a perfect fit.
You can print 5 film positives on Monday and the rest on Friday and they will still fit together.
Now you can print fabulous process color designs with much higher resolution and color accuracy.
When it comes to printing Garments - size does matter.
Why be held to a 12 or 13 inch width laser printer when you can print 17 inches wide on the Epson stylus 3000 or 1520.
Lets face it, for full blown graphics - bigger is better.
No more tiling letter size vellum.
Now you don't have to send out for oversize film - do it in house.
Using Screenprint Separator it is possible to screen print over 40 thousand dots per square inch.
This is equal to an 85 line screen on textiles!
The images above show the difference between toner from a 600 dpi laser printer and the Epson 3000 at 1440dpi.
If you have never printed with film from either an image setter or an ink jet, then you just haven't printed true square dots.
The difference is spectacular.
When burning screens the best positive has to have a solid dense black.
Posjet delivers with crystal clear film and a superior d-max rating right from the printer.
Our emusion dries in just seconds and delivers up to twice the density of competing products.
You don't have to spray anything on them or put them through an additional chemical bath.
CLEAR FILM- MEANS FASTER BURN TIMES AND LESS PINHOLES.
 
Very opaque up ot a 4.02 dmax - no need for toner enhancers
The ability to proof and print color images on the same printer that you use to make film positives is an obvious advantage.
Now you can create full size color comps for client approval.
The Epson stylus 3000 is pantone color calibrated.
|
POSJET INK JET MEDIA 1955 21st. Ave. East Seattle wa 98112 phone 206.760.9559